Asus Nexus 7 Android 6

Every bit seen earlier, Google has been rolling out Android 6.0.1 Marshmallow update to it'southward Nexus devices. Though the OTA update isn't big, weighing effectually 75 MB, information technology comes with some crucial security patches and stability improvements. Post-obit the Nexus 6P and the Nexus 5X that received the update yesterday, other Nexus devices like the Nexus 9, and Nexus vii have received the update earlier today.

Now here we are with the OTA installation method for the the Nexus 7 2013 WiFi and LTE (Mobile) variants. Nevertheless, if you lot are looking for a clean installation using the manufactory image, and then we have also included a tutorial on how you can successfully flash the manufacturing plant image.

You can manually check the updates from the Settings app. Become to Settings> About Phone> Software Information/Updates. Tap the updates selection and bank check if the update announced on your device. If you don't come across any action in there, then go through the methods listed below.

Before we begin verify which firmware you are coming from and flash the OTA accordingly. The MMB29K is the latest Android 6.0.ane Marshmallow firmware for the Nexus seven.

Warning: We at DroidViews won't be liable for whatsoever impairment to your device whatsoever. A full backup is highly recommended as information technology will wipe all of your app and organisation data. Reader'due south discretion is advised.

• Nexus 7 2013 WiFi
  • half-dozen.0 MRA58V -> 6.0.one MMB29K
• Nexus 7 2013 (LTE)
  • 5.one.1 LMY48X -> 6.0.1 MMB29K
  • half-dozen.0 MRA58V -> 6.0.1 MMB29K
• MMB29K (half-dozen.0.1) for Nexus 7 2013 WiFi codename: razor
  • Official Factory Prototype — Download | File: razor-mmb29k-mill-a39e7047.tgz
• MMB29K (6.0.1) for Nexus 7 LTE codename razorg
  • Official Manufacturing plant Image — Download | File: razorg-mmb29k-mill-44d21f0a.tgz

Method 1: Install Android six.0.1 Marshmallow Update on Nexus seven with Stock Recovery [OTA]

1. Make sure you do not have whatever security updates available for your phone prior to Android half-dozen.0.1 Marshmallow. If available, utilise these updates to your phone.
2. Download the OTA cypher file from the download department for your device. Verify the build number you lot are coming from.
3. Transfer the OTA aught file from your PC to your phone's storage or SD card if applicable. Identify the file where you can hands locate it.
4. Now, y'all need to boot your Nexus device into StockRecovery mode. To boot into recovery, restart your device and printing the Volume Down push button while booting up. Or you can endeavor Step iii-4 in next method or refer to the notation given below Method ii.
5. In one case your phone boots into Recovery Mode, Select Apply Updates from phone'south storageand navigate to the OTA file you just saved on your phone. Use the volume keys to navigate and power primal to confirm the action.
6. The installation process will first on your device and have a few minutes.
7. One time the installation is completes, it volition automatically reboot. Otherwise, go back and reboot to system

If later on this update the organisation does non kicking, a factory reset might just piece of work. If this method works for you then you can savor your new firmware. Still, if it fails or gives an error, so refer to method 2.

Method 2: Install Android 6.0.1 Marshmallow Update on Nexus 7 with adb sideload [OTA]

This is another method to install OTA updates. To make this method work, you need to setup adb environment on your PC. You demand to sideload the updates manually to your organisation.

Prerequisites

• Gear up ADB and Fastboot on your computer. You can install the full Android SDK bundle from Google through this link, or get the quick adb and fastboot installer from here. For Mac or Linux Os, click here.
• Install latest Nexus USB Drivers on your computer. This is of import to find the telephone.
• Open Settings> Developer options and enable USB Debugging on your device. To enable developer options, tap the Build Number multiple times (approx. 7 times) inAbout Phone.

Installation Instuctions

1. Brand sure you have setup ADB and Fastboot surround on your PC. Download the OTA package and identify the file in the same directory where the adb is installed.
2. Power off your device and keep it unplugged from your PC.
3. Boot into stock recovery. To practise and so, press and hold volume down and the power button for 5-6 seconds. (Refer to the note given beneath this method)
4. Now on the next screen, select the stock recovery option which will boot you into the recovery.
5. One time into the stock recovery, select the option apply update from adb.
6. Now plug in your device to the PC using a USB cable.
7. Navigate to the location where your adb and fastboot is installed on your PC. While the binder with adb and fastboot files is open, hold shift cardinal on keyboard and right-click on an empty infinite and select "Open command window here" option to launch a command prompt window.
8. Now check your adb connectedness by issuing the post-obit command. It should return device information. Otherwise, you need to make sure your drivers are installed correctly.
   

   adb devices

9. Issue the post-obit command to install the updates
   

   adb sideload ota.zip

10. This will flash the ota update to your system. "ota.cipher" is the proper noun of the file. Make sure you either rename the file to "ota.zip" or type the name of the file exactly with proper extension.
11. Once the installation completes, reboot to arrangement.

For Mac or Linux users, setup adb and result the "./adb sideload ota.nix" command without quotes.

Annotation to boot into recovery manner:

• Ability off phone
• Press Vol Downwards + Power keys until you lot get into the select menu and then cease pressing buttons
• Vol Down to Recovery and press power
• When KO'd Droid appears, press and hold Power and rapidly tap Vol Up keeping power pressed. Equally shortly equally the carte pops upward release power
• Vol Downwards to update from ADB
• Plug into Windows PC or Mac

Now that yous have installed the OTA update, you tin now enjoy Android 6.0.i Marshmallow on your device. If you desire a clean installation then become through the factory prototype installation procedure.

Wink Mill Prototype For Android vi.0.1 Marshmallow Update on Nexus 7 [Full Firmware]

This process volition flash factory image on the Nexus 7. Information technology will perform a clean firmware installation and hence all your information and apps will be lost. So make sure y'all backup everything on your PC. Go through the prerequisites mentioned in the Method 2 and so proceed with the instructions below.

Installation Instructions

• Download the manufactory image from to a higher place and transfer it to your PC.
• Brand certain you have setup ADB and fastboot on your PC. Besides acceptAlways allow from this computer when yous plug in the device for the first time to enable USB Debugging.
• At present power off your device and unplug it from your PC.
• Kick into the bootloader or fastboot mode. To do so, printing and hold book down and the ability push simultaneously for 5-half dozen seconds. When you come across the bootloader screen, connect your device to the PC using a USB cable.(Choose fastboot if pick is available). Alternatively, yous tin besides effect the following code while connected to the PC, to boot into the bootloader provided your device is turned and connected to PC. Open control prompt and issue the command.

adb reboot bootloader

• At present plug in your device to the PC and let the drivers install.
• Navigate to the location where you lot accept placed the factory image file on PC and extract it to get files with .img.
• While the folder with the extracted factory epitome is open, run the flash-all.bat file on Windows PC and confirm the flashing procedure. Look for the process to complete. If you lot use Linux or Mac Bone,  run the wink-all.sh file and follow the instructions.
• Once done, reboot the device normally. In one case yous see the new kick logo, that means the system has successfully been installed.

First kicking may take a while, so be patient. If necessary, you may need to unlock bootloader on your Nexus 7 if the method fails.

For queries, comment down below. If we have helped you, then like and share us on social platforms. If y'all need assist with other devices, let us know.

Reader Interactions

Source: https://www.droidviews.com/install-android-6-0-1-marshmallow-update-on-nexus-7-ota-and-factory-image/

Posted by: cordeiroloores1981.blogspot.com

Share this post